Wrap The Entire Connection Area Using Composite Thread Protectors!

Machineries and heavy equipment play a major role in the oil industry. The large pipes and machines used for taking oil from large wells are to be manufactured with utmost care and the quality should never be compromised. But what is the use when you manufacture machines and equipment without considering the factor of protecting them throughout the shipping and assembly? The oilfield thread protectors are the one of the top solutions to this problem. In the last few years there have been continuous research on the factors that affect the oil and gas industry. All the research is aimed at obtaining a proper and accurate solution, however the basic and foremost in the protection of oil and gas is to make sure that the tools, pipes and machineries used during the drilling process are perfect and does not possess any quality issues.

Thread protectors play a vital role in the suction of oil from the well and this is because when the pipe threads are protected they are not exposed to minute dust particles, UV rays and other factors that affect the thread size. Only when the thread sizes are accurate they can then be fixed with the other pipes. A minor mistake in the thread size affects the whole system. Composite thread protectors are used for protecting the connectors. It will prevent water, dust and any other corrosion agent that could disturb the nature of the pipe thread. These three factors are the major issues for the performance of the pipes. Also while shipping, the pipes may be exposed to sunlight and UV rays that are emitted by the sun, which can then react chemically with the material with which the pipe is manufactured. Therefore, to protect the tubular thread ends, it is necessary to install protectors.

When the thread protectors are perfect and accurate, they will never loosen during transportation. The materials used are high density poly-ethylene which helps in absorbing shock on the pipe and ensure a superior protection. Natural disasters and extreme weather conditions are also another factor affecting the quality of the pipes during transport. When the high density polyethylene is used, there are a lot of advantages. The high density polyethylene plays an important role in its moisture resistance.

High density Polyethylene, also known as HDPE, withstands temperature from -40C to 90C, an ideal temperature range necessary for protecting the pipe thread from the sunlight. Also this material does not react to any chemical reaction and on the flip side, it does not allow the pipe thread to chemically react. Therefore one need not worry about the change in the size of pipe threads during the assembling of the equipment. This low cost and ready to be used HDPE material, is the most used by many manufactures. They are routinely tested and supplied for consistent performance. Drill pipe protectors from good companies always have a better chance for protecting your equipment.